WE ARE CURRENTLY SHIPPING NON-FIREARM, IN STOCK ORDERS PLACED ON:
  • Home
  • Pearce Grip Magazine Extensions for Glock Handguns

Pearce Grip Magazine Extensions for Glock Handguns

$9.95
SKU: 2180
$9.95
The Pearce Grip extension replaces the factory magazine floor plate and provides the extra finger groove for shooting comfort and control.

Note: See Additional Information for Full Sizing Information
Please Note: This unit replaces the factory magazine floor plate and provides the extra finger groove for shooting comfort and control.

PG-19:
Glock Mid and Full Size model grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Model 19,23,32 and full size 9mm/40SW/357SIG. Also fits Model 37 GAP.

PG-19G5:
Glock Gen 4/5 Mid and Full Size model grip extension. These extensions replace the magazine base plate providing better comfort and control by adding approximately 1/2 inch of gripping surface. Will only work on Gen 4/5 magazines that have a capacity greater than 10 rounds.

PG-26:
Glock model 26/27/33/39 grip extension. Replaces the magazine floor plate. Does not alter capacity.

PG-26XL:
Glock model 26/27/33/39 grip extension. Replaces the magazine floor plate. Does not alter capacity. This extension is 1/4" longer than the PG-26.

PG-26G4:
Gen 4 GLOCK model 26/27/33/39 grip extension. Replaces the magazine floor plate. Does not alter capacity.

PG-2733:
Glock model 26/27/33 plus extension. Replaces the magazine floor plate converting the factory model 27/33 magazines to 10-round capacity and converts the factory model 26 magazine to 12-round capacity. All your state and local laws apply.

PG-42733:
Glock Gen 4/5 model 26/27/33 plus extension. These extensions replace the magazine base plate and internal floor plate providing additional capacity and an additional 5-8" length for better control and comfort. They add two rounds to a G26 magazine or one round to a G27/33 magazine. Only for Gen 4/5 magazines

PG-29:
Glock model 29 grip extension. (also fits M30 9-round mags) Replaces the magazine floor plate. Does not alter the capacity of the magazine.

PG-30:
Glock model 30 grip extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.

PG-360:
Glock model 36 plus zero extension. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine.

PG-39:
Glock model 26/27/33/39 plus extension. Replaces the magazine floor plate converting the factory model 39 magazines to 7-round capacity, converts the factory model 27/33 magazine to 11-round capacity and converts the factory model 26 magazine to 13-round capacity. All your state and local laws apply.

PG-42:
An extension for the GLOCK 42. This extension replaces the magazine floor plate providing extra gripping surface for better control and comfort without altering the capacity of the factory magazine.

PG-42+1:
An extension for the GLOCK 42. This extension replaces the magazine floor plate providing one extra round of capacity and approximately 3/4" additional gripping surface for better control and comfort while also incorporating the factory texture pattern.

PG-43:
An extension for the GLOCK 43. This extension replaces the magazine floor plate adding approximately 3/4" additional length resulting in better control and comfort without altering the capacity of the factory magazine. This extension is slightly longer than the one provided by the factory (actual length 0.820") and incorporates the factory texture pattern as well as an ergonomic curve for better grip.

PG-43+1:
An extension for the GLOCK 43. This extension replaces the magazine floor plate providing one extra round of capacity and approximately 3/4" additional gripping surface for better control and comfort while also incorporating the factory texture pattern.

PG-FML:
GLOCK Magazine grip enhancer. Grip enhancer replaces the magazine base plate and retains all other factory components. Does not alter the capacity of the magazine and provides better comfort by filling the semi-circular cut-out in the lower front area of the grip body. Adds approximately 1/4 inch of gripping surface. Will not fit a non full metal magazine.

PG-G5BP:
Enhanced baseplate for Glock Gen 5 17/19/34. Provides better comfort by filling the semi-circular cut-out in the lower front area of the frame.

PG-G9P2:
GLOCK Magazine Extension. For use on all high capacity Non Full Metal Line and Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 2 rounds. Increases the capacity of 40 SW 357SIG and 45GAP magazines by 1 round. Not for use on 10-round magazines.

PG-GP:
GLOCK Magazine Extension. For use on all Mid and Full Size high capacity Full Metal Lined Glock magazines. Increases the capacity of 9mm magazines by 3 rounds. Increases the capacity of 40 SW, 357 SIG by 2 rounds and 45GAP magazines by 1 round.

PG-2021:
GLOCK compact and full size grip enhancer. Fills the cut-out in the lower front strap of the grip frame adding gripping surface. For use on all G20 and G21 magazines. Does not alter the capacity of the magazine.

PG-G4+:
Featuring the same checkering texture as Gen4 Glocks, this unit adds capacity to Sub-Compact, Mid, and Full Size Glock high capacity magazines. This magazine extension replaces the original floor plate and internal locking plate and adds two rounds to a 9mm, two rounds to a 40SW and 357SIG, and one round to a 45GAP magazine. This unit will not fit the 10mm or 45ACP models.

PG-1045+:
This extension replaces the magazine floor plate adding two rounds capacity to Glock factory G20, G21, G29, G40 and G41 magazines. This unit is for use on high capacity magazines only; it will not work on the 10-round G20 and G21 magazines or Glock M30 10-round magazines. This unit WILL fit on Glock G30 9 round magazines, increasing capacity to 11 rounds. This extension works on both Gen3 and Gen4 Glocks.

PG-MK9:
Fits Kahr T40, TP40, P40, K40, PM40, T9, TP9, P9, K9, PM9, MK9, MK9, PM9, PM40. Not for use with 45 ACP models or CW frames. Replaces the magazine floor plate adding grip length. (Two extensions per package) Also Fits Colt Pocket Nine

PG-11:
For Taurus PT111 and KelTech Model P11. Replaces the magazine floor plate adding grip length. Does not alter the capacity of the magazine. Note: (Does Not Fit Taurus Millennium Pro Model)

Order Online or Call Toll-Free: 1-800-601-8273
  • Home
  • Flat Faced Basic Pyramid Trigger

Ratings & Reviews

12 reviews

4 stars
0 reviews
2 stars
0 reviews
1 star
0 reviews

Pearce extension

by

I bought this for my G42 and G43 and they work perfectly extra grip and an extra round at a reasonable price thanks for a great product

Pearce 43+1

by

Except product provides extra grip space while maintaining concealablity. I have used on many of my handguns and have had zero reliability issues unlike some extended base plates.

Helped with the grip

by

I had the Pearce grip extensions for my Glock 30. They provided just enough length to the grip to fit the pinky and made shooting the pistol more comfortable.

Choice of law enforcement

by

I use this product. Excellent

PG-2733

by

Just purchased these and installed them. Look great, fit perfectly, and easy to install. Fits just like the original and looks just like the finger grooves on the handle. Got the +1 extension for the Glock 27. The factory holds a very tight 9 rounds, and the addition is actually not +1. Makes it more of a comfortable 9. I put that more on the Glock magazine than the extension. Over time the spring may wear some to fit the extra round. Even without the extra round, the perfect pinky grip and better fitting 9 rounds makes this a must have for all mini Glocks.

Another satisfied customer, for life.

by

Excellent choice of add-on part for my 27. I chose the PG-39 (+2) and it feels and works as I hoped and expected. Lenny's video on how to install was spot-on as usual, and a pleasure to watch.

No Bueno on the 10th round but does help with the grip of my G27

by

I bought the PG2733 for my G27 in hopes of getting 10 rounds in the mag. No bueno. Like someone else pointed out, I can still only get 9 in it but it is easier to get the full 9 rounds in. I wish I had purchased the PG39 for an extra 2 rounds and would have been happy with 1 extra round with less tension on the spring. The PG2733 does add the extra room for a full grip so I give it 3 stars because of this. Would have given it 5 if it did as advertised.

PG-19G5 Pearce Grip Magazine Extension

by

I own a Glock 32/Gen 4 firearm and the PG-19G5 Pearce Grip Magazine Extension is a perfect upgrade. Ordered two more of the PG-19G5 extenders. Thank you for such a great product!

Should be a factory part!

by

Perfect for the 42 and 43! I have small hands but still felt that a pinky extension was necessary and it looks good too. Base plates are notorious for being hard to swap and the tiny ones are no exception. I made use of a 2x4 and leverage.

PG-19G5 Pearce Grip Magazine Extension

by

Got this for my Glock 32 Gen 4 magazines. Put some grip tape on the extension to match up with my Foxx grips on my pistol. Very nice feel! Will buy more grip extensions. Thank you for such a great product!

PG 19 for G19 gen4

by

I bough this for my 19 gen 4 as I have larger hands and didn't like my pinky hanging off. It works great! It feels good and there is no gap between the stock and magazine.

Would be 4 stars if...

by

This is my 1 year review on the Pearce Grip PGGP over 500rds through the mag. The mag extension works fairly well and is built out of a solid drop resistent polymer, because of this I ran into zero issues dropping the mag on concrete or soft ground. The massive downside was after a year the spring in the mag was completely loose. The slide no longer locks back when using this mag. Definetly reccomend a +10% power spring if you purchase this.