Pure Tungsten Guide Rod for Gen4/5 Glocks
Ratings & Reviews
2 reviews
Pure vs standard Tungsten Gen 5 Glock 34
by Justin
First off let me start with I have not fired it since installing it. I don't foresee any problems with it. Now to the good stuff. When i was looking into this guide rod over the standard tungsten one, the main question I had is, how much does it weigh vs standard tungsten. So im running an extended uncaptured one for the 34 Gen 5. The standard extended uncaptured with 13# spring weighs 2oz. The PURE extended uncaptured with 13# spring weighs 3.6oz. Yes you can tell a difference in between the 2. Just to let you know the weight of the guide rod while using a 13# spring can cause it to not lock up on a press check. I don't see this causing any problem under normal operation but if I hold the gun vertical pointing up and pull the slide back just enough to unlock. It will not spring back to locked. The easy fix is heavier spring. I use this setup in USPSA carry optics.I have a SRO on the slide which effects the weight.
Heavy Metal!!
by TopHat
Stock in comparison to this seems like a cheap joke because of the massive weight difference. Much improved look and feel over stock having this impressive weight added and shiny metal beats the plastic nub hands down on looks! Did have a couple stovepipe but only when the kid was shooting it which was more likely due to limp wristing as it did not happen to me. Very happy with this upgrade and highly recommend!