GS M1X Frame for Glock 26 Gen 3-5 "The Original 26X!"

Feels good man

I met Lenny McGill both shooting 1992 USPSA nationals. Both enjoyed shooting sports and both development self-defense shooting skills. Coming from a time where 1911 45 and BHP 9mm were the only two choices now more than you can count.My first Glock 89 TN state G22 table 40cal just became major stock caliber which took 3 manufacturer sig,s&w and Glock. With a 3lb trigger and 15+1 after running one on a plate rack i was sold. Today everyone makes a copy of the Glock. It has more after market support than any other weapon and the 26x and 27x are long overdue. I am getting one soon and after a thousand rounds I will tell how great it is even though I already know!

I can't believe I'm leaving the first review for this masterpiece! Arrived super quick and was a cinch to swap the controls over to the frame. Believe the hype and pick one up today!

Almost-perfect Glock 26X frame. It feels like a genuine OEM upgrade and functions flawlessly. My only gripe is the gas pedal design: the cutaway material that’s gone used to protect my finger from the takedown lever. With this design it now it rubs/cuts my thumb. I’m looking forward to future releases from GS. ★★★★☆

Almost-perfect Glock 26X frame. It feels like a genuine OEM upgrade and functions flawlessly. My only gripe is the gas pedal design: the cutaway material that’s gone used to protect my finger from the takedown lever. With this design it now it rubs/cuts my thumb. I’m looking forward to future releases from GS. ★★★★☆

Just got my 26x frame and took it to the range and shot 200 rounds 9mm with it and it felt great .Well worth the money. I'm going to get a frame for my G27.

This is the ergonomic profile I've been looking for in a CCW since ever. I've never been more satisfied with a Glock in my hand. The weight distribution is perfect. I always felt like the 19 was good but only felt "correct" with a 17rd mag in (which is difficult to conceal) to balance out the weight from the barrel/slide. Without that extra barrel/slide weight in the 26X the 15rd mag feels right.

THANK YOU LENNY!

Just received mine, works flawlessly! Well made and precise!!! Locking block and trigger group slides in nicely. Will be buying another!

Received mine this past Friday. Assembled that evening. It took 15-20 minutes to transfer parts from my Gen 3 Model 26. No problems. You are left with an unemployed locking block pin. Saturday at the range it functioned as expected. Very comfortable to shoot. The only tiny problem was stretching out a holster to accept the light rail. Overall, a great purchase.

The fit and function of the side was perfect with my 26 Gen3 slide. I love this combination and may buy another.

Well made offering... tight tolerances and easily accepts OEM Glock internals. Range vist on 10/23/25 was very successful and retained OEM glock expected accuracy. 100Rds tested with zero flaws. Frame easily accompanied a G26 G33 and G27 slide as well. Accuracy= sub 2" group at 12yds rapid fire w/115gr FMJ. Ergonomics and textures were excellent and comfortable. Still viable for front pocket carry... HOMERUN

This thing is amazing. It feels premium. I ordered Gen4 parts to complete the lower. I put in an Apex trigger. I prefer the stippling over the standard Glock. The undercut is spot on. It does not fit in my standard holsters so I ordered the one found here.

Purchased this product and was very excited to receive it. Ordered in July - delivered end of October. Installed my g26 mos slide and barrel that I had C cut port done from GS as well - love the feel and look - only problem it doesn’t fit in the holsters that I have. Very disappointing I must say- kinda took the fun out for sure.

Honestly this grip is perfect. Feels like an actual Glock, and not some jacked up Frankenstein job done with a dremmel tool and soldering iron. It honestly feels perfect in the hand. Today was the first day I got to shoot it (after having it for a week), and I wa very happy. It's a very flat shooter and the sights come back on target instantly. I was putting six rounds in the 5 ring rapid fire repeatedly at 10 yards. It's much more pleasant to shoot than my 43X in that regard. I'm not sure why Glock hasn't made a 26X on their own, but if you're in the market for that setup this will definitely fit.

Not my first Glock 26 but already my favorite. Very high quality finish. The extended grip fits my hand much better than the standard 26. I also like the larger magazine release. I don’t plan to attach a light but having the option to is nice. Overall, exactly what I was looking for before I even knew I was looking for it.

The balance, grip texture are fantastic. Added my Gen 5 mos slide with a performance trigger by Glock. What a great carry and all around shooter.

Very pleased with the M1X/26X frame. The fit in the hand is perfect. The detail with the trigger guard are exactly as advertised - very comfortable. The stippling is perfect - it's in the right places. The light rail is gonna be great. It's clean and neat - superior attention to detail, high quality! Overall the fit in my hand is what has sold me on this frame. It's perfect. It was well worth the wait. You done good with this one Glock Store! Thanks!

I received my frame with the lower parts kit installed. I bought it to use with my Gen 3, G27 slide. The lower parts kit is a Gen 5, so I had to get a Gen5 rear cover slide back plate. After slapping the Gen 5 cover on my Gen 3 slide, the weapon functioned flawlessly. It has a great feel. The undercut was easy on my “Glock knuckle.” I was going to get a 9mm conversion barrel and RSA for my Gen 27 slide, but I honestly felt like the .40 cal ammo was less snappy on this frame. I am very impressed with this product. I’ll break it in and evaluate as a replacement for my carry gun (43x).
Get one!

Got my M1X yesterday, built it last night and fired it today, I did change the standard slide release for the extended release and the lock block that came with the parts kit did not work , it was like the holes for the pin to hold it in place were to high but I had a backup and it worked perfectly,
I had planned to shot a lot more but due to our weather I only fired 50 rds of Winchester 115 fmj , it functioned perfectly!! Going to fire my defense load next time,
Finding a Holster was a issue, I like to carry owb in leather , I had a Urban Carry for my Glock 26 gen5 , tried it and the light rail was hanging on the trigger lock , a little modification and now it works perfect and holds the pistol firm , this may not be for everyone but it works for me until something better is released , the Urban holster I used is
215 R for optic

Ordered 8/29 and got it 10/29. Didn't ship with the holster I purchased with it. The frame is really nice, gen 3 fit perfectly. Ive ran @200rounds with no problems. Only problems were the 2 month wait, which I knew ahead of time but not coming with the holster I had to put my fen 3 frame back on so I could continue to carry my pistol. Definitely does not fit any of my 4 g26 holsters. Never thought I'd get the frame before the holster, almost a.month after picking up the frame and no response about the holster ordered for it.

Installed a fully built GSMX1 frame on a brand-new Glock 26 Gen 5. Reliability is flawless—no malfunctions. The big downside: to accommodate a light, the frame is deeper/bulkier up front (from the guide rod area down to the front of the trigger guard). That change means it won’t fit standard Glock holsters—Glock 26 holsters won’t fit, Glock 19 holsters won’t fit, Glock 17 holsters won’t fit. Total fail when it comes to holsters. DAMN ANNOYING! Otherwise, it’s awesome: it makes the 26 a very pleasant shooter and more comfortable in hand than a 19.

Was excited to finally get my order; didn't take long for me to swap out almost everything. had to change the back plate on my Gen 3 G26 slide, but other than that, everything worked. Swapped out my G27 as well and after changing the back plate and the extractor to a Gen 5, ALL GOOD. can't wait for a G42X - hint hint.

I didn't want one at first but after shooting my Glock 26, I didn't shoot it well enough due to it's small size. I am glad I ordered this frame and it has a much nicer feel than the actual Glock 19 frame. I also ordered the Kiral beaver tail, which gives it a much better feel, especially for those that get slide bite from a Glock.

Took a while to get this, but it was worth the wait! Got it assembled and ready for the range.
A word of warning... although Gen 1-5 slides will work, they'll require a Gen 5 Glock Slide Cover Plate to fit. There's an extra piece of frame on this that won't fit the older slide covers. Put on a Gen 5 cover and you'll be good to go.

I’m looking for a holster compatible for it I’m currently running a tlr 7 sub and an optic but having trouble with finding a holster